A washer pedestal, also called a riser, is a raised platform that sits under a front-load washing machine or dryer. It adds roughly 6 to 23 inches of height, creates storage space underneath, and brings the drum up to a loading height that spares your back and knees.
That last point is the whole reason people buy them. A front-load washer that sits on the floor means bending to the bottom of the drum every single load. Raised 14 to 20 inches, the same machine loads at roughly waist height. You also gain a shelf or a pull-out drawer for detergent, softener and dryer sheets, and the floor underneath stays open and cleanable.
Before anything else, the compatibility warning. Brand-specific pedestals are not interchangeable. LG pedestals only fit compatible LG front-load machines, Samsung pedestals only fit compatible Samsung front-load machines, and a 29-inch aftermarket frame is a different category of product entirely. Buying the wrong one is the single most common reason these get returned, so we put a measurement checklist further down before you spend anything.
This roundup covers the 10 pedestals that make the most sense for a laundry room in 2026, spanning brand-matched OEM drawers, universal steel frames, low-rise risers and matched two-packs. We looked at lift height, load capacity, storage type, footprint, brand compatibility and the complaint patterns buried in owner reviews. If you are also replacing your machines, budget for two pedestals, not one.
We have covered the rest of the laundry room too. Our guide to the best laundry hampers pairs well with a pedestal, since the storage underneath is only useful if you have somewhere to put the baskets.
Table of Contents
Top 3 Best Washer Pedestals for Laundry Rooms in 2026
Samsung 27 in. Pedestal with Drawer
- 14.2 in lift
- Drawer storage
- Samsung 27 in. front load fit
Our top three cover three genuinely different needs. The Samsung 27-inch pedestal is the one we recommend to most people because it is the finish-matched, brand-correct choice with the largest owner base in this group. The EZ Laundry frame is the better answer if you own machines from more than one brand or want leak protection built into the base. The VEVOR pedestal is the pick when the budget matters more than a drawer.
One housekeeping note before the table: nine of these ten ship as a single unit. If you are elevating a washer and a dryer side by side, you need two, and that changes the math on every price in this guide.
All 10 Washer Pedestals Reviewed Side by Side in 2026
| Product | Specifications | Action |
|---|---|---|
| Samsung 27 in. Pedestal with Drawer WE402NW/A3 |
|
Check Latest Price |
 Samsung 27 in. Laundry Riser WE272NV/A3 |
|
Check Latest Price |
| EZ Laundry Pedestal with Drain Pan 27 x 18 in. |
|
Check Latest Price |
 GDLF 29 in. Laundry Pedestal |
|
Check Latest Price |
 Samsung Bespoke AI Comb Pedestal WE702NZ/US |
|
Check Latest Price |
 Royxen 29 in. Heavy Duty Pedestal |
|
Check Latest Price |
| VEVOR 28 x 28 x 16 in. Pedestal |
|
Check Latest Price |
 Ilyapa 28 x 28 x 16 in. Stand with Drawer |
|
Check Latest Price |
 ZealWe 29 in. Laundry Pedestal 2-Pack |
|
Check Latest Price |
 DTK 29 in. Pedestal with Hidden Storage |
|
Check Latest Price |
Read the lift height column first. Anything under 8 inches is a riser, not a pedestal: it clears the floor a little but does not change your bending much. The useful ergonomic range is 14 inches and up, and the storage benefit really opens up past 18 inches where a full laundry basket fits underneath.
1. Samsung 27-Inch Washer Dryer Pedestal with Pull-Out Drawer
SAMSUNG 27-Inch Washer Dryer Pedestal Stand w/ Pull Out Laundry Storage Drawer, Stainless Steel, WE402NW/A3, White
Lift: 14.2 in
Fits: Samsung 27 in. front load
Weight: 36.6 lbs
Drawer storage
Pros
- Exact fit for Samsung 27 in. front loaders
- Lifts the drum well above knee height
- Drawer runs smoothly on quiet tracks
- Rust resistant finish
- One-year parts and labor warranty
Cons
- Only fits Samsung 27 in. front load models
- Rubber feet make the loaded unit awkward to push back
- Occasional transit damage or missing hardware
If you own a Samsung 27-inch front-load washer or dryer, this is the pedestal to buy. It measures 27 inches wide by 14.2 inches high by 28.1 inches deep and weighs 36.6 pounds, and it bolts to the machine rather than just sitting beneath it. That attachment detail is why it feels solid compared with a loose steel frame.
The lift is more than 12 inches, which moves the drum from ankle-shin height to roughly mid-thigh. Owners describe the drawer as the feature they use most, and the finish matching is the quiet win: it disappears under the machine instead of looking like a separate piece of furniture.
The drawer sits raised off the floor so it does not scrape on the tile, which is a detail you only appreciate after a few months. Reviewers also mention true rubber feet that grip rather than skate. Two recurring complaints show up in owner feedback: transit damage on arrival, and units arriving with missing hardware, so check the box before you push the machine back.
What to check before you order
Confirm the machine is a Samsung 27-inch front loader. Top-loaders and 24-inch Samsung machines will not sit on this pedestal, and the machine needs the factory attachment bracket to secure properly.
Measure your doorway too. At 27 inches wide and close to 29 inches deep, this pedestal plus a 27-inch machine is a wide assembly to move through a tight laundry closet door.
Where it falls short
The rubber feet that make it stable also make it heavy to reposition once loaded, so plan the final position before you slide the washer on. And the drawer is a single cavity with no dividers, which owner reviews call out as the main thing they would change.
None of that is a deal-breaker for most households. If you need divided storage or a lower profile, keep reading.
2. EZ Laundry Washer and Dryer Pedestal with Drain Pan and Hose
EZ Laundry Washer and Dryer Pedestals with Drain Pan & Hose – 27″ W, 18″ H
Lift: 18 in
Capacity: 800 lb
Size: 27 x 27 x 18 in
Fits most 27 in. machines
Pros
- 800 lb alloy steel frame
- Integrated drain pan and hose
- Universal 27 in. fit across major brands
- Quick intuitive assembly
- Good height for back strain relief
Cons
- One pedestal per order so pairs need two
- 18 in lift still needs some bending
- Open shelf gives less enclosed storage
This is the pedestal I recommend to anyone who does not want to think about brand compatibility. The 27-inch top fits most major-brand machines, and the 800-pound alloy steel frame is the joint highest capacity in this group. It weighs 40 pounds and comes in a powder-coated black finish, with gray and white options also listed.
The feature that separates it from the other universal frames is the integrated drain pan and hose. If the machine hoses ever fail, water lands in a pan under the machine instead of on your floor. Several heights are offered across the line, so the same frame can be a 10, 16 or 18 inch lift.
Assembly is the other thing owners praise. Nothing complicated, no special bracket, and the whole thing goes together with basic tools. The lift at 18 inches puts the drum in a genuinely comfortable range for most front loaders, and it leaves a usable shelf underneath for supplies.
What to check before you order
Measure the floor space, not just the machine. This is a 27 by 27 inch footprint, and a front-load washer with a protruding door can overhang the front edge. You want the machine fully supported on the top plate.
Confirm your hoses reach the drain pan. The pan has a hose that needs somewhere to run, and in a tight closet you may need an extension.
Where it falls short
Only one pedestal is included per order, so a matched washer and dryer set means two orders. The shelf is open-frame, which means you see everything under the machine rather than hiding it behind a drawer front.
And 18 inches is a good lift, not a dramatic one. If you are tall or you have back issues, one of the 20 to 23 inch frames below may serve you better.
3. VEVOR Laundry Pedestal with Storage Shelf, 660 lb Capacity
VEVOR Laundry Pedestal with Storage Shelf, 28″ Lx28 Wx16 H, Washer and Dryer Stand Base Universal Platform, Fit 660lbs Capacity, Heavy Duty Steel Multi-Functional Base for Washing Machine
Lift: 16 in
Capacity: 660 lb
Size: 27.95 x 27.95 x 16.14 in
Alloy steel
Pros
- Lowest entry point in this group
- 660 lb capacity handles full-size washers
- Four EVA shock absorption pads included
- Fast screwdriver-only assembly
- Works across virtually all major brands
Cons
- 16 in lift is the shortest here
- Shelf storage only with no drawer
- Basic utilitarian styling
The VEVOR pedestal does one job cheaply and does it with real materials. The frame is SPCC cold-rolled steel plate rated to 660 pounds, which is more than a loaded full-size washer needs. It raises the machine 16 inches and gives you an open shelf underneath for baskets and supplies.
What surprised me more than expected was the four EVA shock absorption pads in the box. They sit between the machine feet and the top plate, and owners specifically credit them with a noticeable reduction in the walking vibration that makes front loaders feel unstable.
Assembly is screwdriver-only and the hex wrench, socket wrench and manual are included. At 35.3 pounds it is light enough to slide into position without help, which matters more than it sounds when you are working alone in a laundry closet.
The listed fit is wide: Samsung, LG, Whirlpool, GE, Miele, Electrolux and Bosch are all named. A universal frame like this is the safe choice when you are buying machines and pedestals at the same time and the brand is still undecided.
What to check before you order
Sixteen inches clears the floor but does not fully solve bending for a tall person. Measure your drum height unloaded, then add 16 inches, and see whether that lands at a comfortable waist height for you.
Also confirm the 27.95 inch square top fully supports your machine. Small European-format machines with narrow cabinets can overhang.
Where it falls short
There is no drawer. Everything under the machine is on open display, so this suits a laundry room where an open shelf is not a problem rather than one where you want the floor to look finished.
The 660-pound rating is also the lowest steel capacity here, though still well above real machine weights. If you want the tallest lift at the lowest price, the DTK at number 10 gives you 23 inches for not much more.
4. Samsung 27-Inch Wide Laundry Riser, 6 Inch Lift
SAMSUNG 27” Wide Laundry Riser Pedestal Stand for 27” Wide Front Load Washer or Dryer, Lifts Machine 6”in Height, WE272NV/A3, Stainless Steel, Brushed Black
Lift: 6 in
Fits: Samsung 27 in. front load
Weight: 16.8 lbs
Open base
Pros
- Low profile keeps the footprint tight
- Meets ADA standards with Samsung machines
- Solid and steady under a loaded machine
- At 16.8 lbs it is easy to reposition
Cons
- Only fits Samsung 27 in. front loaders
- Modest 6 in lift compared with full pedestals
- No storage at all
- Conflicting weight figures in listings
This is a riser, not a pedestal, and that distinction matters. At 6 inches tall and 16.8 pounds, it lifts a Samsung 27-inch front loader just enough to protect the machine body from floor moisture and to give you room to run a mop underneath. It adds no storage at all.
The reason it is still worth knowing about is the accessibility claim. Samsung states the riser meets ADA standards when paired with a compatible 27-inch front-load washer or dryer. That makes it a cheap, brand-correct option for a household where someone has limited bending range.
The build is described as supporting a washer and dryer under continuous use, and the frame attaches directly to compatible Samsung front loaders rather than relying on weight alone. It comes in brushed black, champagne and white, so you can match a machine set.
Owners rate it as solid and steady under load, which is the main thing you want from a riser. The lower star average compared with full pedestals comes down to expectations: people expecting a storage pedestal are disappointed by the modest lift.
What to check before you order
Be honest about the 6-inch gain. If your goal is to stop bending to reach the drum, this will not do it. If your goal is floor clearance and accessibility compliance, it does exactly what it says.
Verify your Samsung is a 27-inch front loader. It is the only family this riser attaches to.
Where it falls short
There is no storage, so it does not help small laundry rooms the way the higher pedestals do. And listing data for this model is inconsistent, with some pages describing a much higher net weight, so confirm the physical dimensions against your space.
5. GDLF 29-Inch Laundry Pedestal with Three Storage Levels
GDLF 29″ Laundry Pedestal, Washer Dryer Pedestal with Storage, White
Lift: 19.6 in
Capacity: 700 lb
Size: 29 x 29 x 19.6 in
Weight: 80 lbs
Pros
- 700 lb steel frame with anti-vibration pads
- Three storage levels including a telescopic basket holder
- Integrated drainage tube with rust-proof finish
- Wide 29 in top suits most machines
Cons
- Not suitable for top-loading machines
- Heavy at 80 lbs so repositioning is a two-person job
- Closely matched to other generic pedestals
The GDLF pedestal is the storage specialist in this group. At 19.6 inches tall with three levels, it is one of the few frames here where you can pull a full laundry basket out on a telescopic holder rather than crouching to reach it. That holder is the feature owners mention first in reviews.
The top plate is 29 inches square, which is the widest here and gives you more tolerance when positioning a machine that does not sit perfectly centered. The steel frame carries 700 pounds, and anti-vibration pads are included for quieter spin cycles.
There is also a built-in drainage tube with a rust-proof metal finish. If you already have a pan under the machine, this handles the drip path instead. Listing data warns against top-loading machines because of the height, which makes sense at this height.
My reservation is weight. At 80 pounds this is by far the heaviest frame in the roundup, and that matters in a laundry closet where you may need to reposition it to get hoses or outlets behind the machine. Plan the position before assembly.
What to check before you order
Confirm your machine is front load. The height and top plate make top loaders a poor match, and the listing says so directly.
Check the 29-inch square footprint against your floor space. This is the largest footprint in the group and it will not fit a narrow closet slot.
Where it falls short
Besides the weight, you are paying for a generic frame design that several brands sell in similar form, so there is little that distinguishes it visually. If appearance matters in a finished laundry room, one of the cabinet-style options below reads more like furniture.
6. Samsung Bespoke AI Laundry Comb Pedestal with Pull-Out Drawer
SAMSUNG Bespoke AI Laundry Comb Pedestal with Pull Out Storage Drawer, WE702NZ/US, Dark Steel
Lift: 14.7 in
Fits: Bespoke AI combo WD53DBA900HZA1
Weight: 47.2 lbs
Drawer
Pros
- Purpose-built fit for the Bespoke AI Laundry Combo
- Clean dark steel finish that matches the lineup
- Drawer keeps laundry essentials together
- Solid lift height for comfortable loading
Cons
- Compatible with one specific Samsung combo model
- Highest price in this group
- No storage beyond the single drawer
This pedestal exists for one machine: the Samsung Bespoke AI Laundry Combo WD53DBA900HZA1. If that is the appliance on your floor, this is the correct and best-looking answer, and the dark steel finish matches the Bespoke line cleanly.
The lift is more than 12 inches at 14.7 inches tall, with a pull-out storage drawer underneath. At 27 inches wide by 31.1 inches deep it is deeper than most pedestals because the combo machine has a deeper cabinet.
Owners with the matching machine rate the fit and finish very highly, and the 4.5 average here reflects that. Just be realistic about the narrow applicability: this is not a general-purpose pedestal and it will not fit any other Samsung model.
If you are shopping for a combo unit, buying the pedestal at the same time is the sensible move. The fit is guaranteed by design rather than by measuring, and the finish is designed to disappear under the machine.
What to check before you order
Match the model number exactly. WD53DBA900HZA1 is the listed compatible machine, and anything else in the Samsung range is out of scope for this pedestal.
Check the 31.1 inch depth against your wall clearance, since it is deeper than the standard Samsung pedestal.
Where it falls short
The price is the highest in this roundup and the review base is small, which is normal for a model-specific accessory. And with a single drawer and no shelf, storage is limited to one level.
If you do not already own that exact combo, skip this and pick one of the universal frames instead.
7. Royxen Heavy Duty 29-Inch Laundry Pedestal with 20 Inch Lift
Royxen Washer and Dryer Pedestals Heavy Duty Metal Laundry Pedestal 29″W x 29″D x20″H, Washer Dryer Pedestal Extra Big Screws for Anti-Vibration, Basket Shelf, 800lbs Capacity, Black
Lift: 20 in
Capacity: 800 lb
Size: 29 x 29 x 20 in
Weight: 46.7 lbs
Pros
- 800 lb reinforced steel frame
- Smooth-gliding pull-out basket holder
- Universal top fits Samsung LG Whirlpool GE Haier
- Extra-large anti-vibration hardware
- Two-year warranty
Cons
- Open frame gives limited enclosed storage
- 20 in raise is not the tallest available
- No integrated drain pan or hose
The Royxen frame balances height and capacity better than most universal options. It raises the machine 20 inches and carries 800 pounds on a reinforced steel frame, and it weighs 46.7 pounds, which is heavy enough to feel planted and light enough to move once.
Its selling feature is the hardware. Extra-large screws are included specifically for anti-vibration mounting, and owners credit the frame with noticeably less walking and wobble during spin cycles than they had on a bare floor.
The pull-out basket holder glides smoothly with an ergonomic handle, and an integrated lower shelf holds detergents and supplies. Samsung, LG, Whirlpool, GE and Haier are all named as compatible, plus other standard machines.
The two-year warranty is the longest in this group by a clear margin, which matters on a steel frame you plan to keep for a decade. Most competitors in this roundup offer one year or less.
What to check before you order
Verify the 29-inch square top fully covers your machine footprint. A 27-inch washer leaves a lip on each side, which is fine, but a machine with a protruding control panel should still sit within the plate.
Make sure you have headroom. At 20 inches added to machine height, you need roughly 55 inches of vertical clearance for the dryer on top or an overhead shelf.
Where it falls short
Everything below is open frame, so your baskets and bottles are visible. If you want a finished look you will need a cabinet-style pedestal instead.
There is also no drain pan, so this does nothing for leak protection the way the EZ Laundry frame does.
8. Ilyapa Washer and Dryer Stand with Drawer and Anti-Vibration Pads
Ilyapa Washer and Dryer Stand – 28x28x16 in. Universal Laundry Pedestal, with Drawer and Anti Vibration Pads – 400 lb Weight Capacity Washing Machine Base Compatible with Samsung, LG, GE, Maytag
Lift: 16 in
Capacity: 400 lb
Size: 28 x 28 x 16 in
Weight: 48.2 lbs
Pros
- Built-in drawer keeps detergent and softener within reach
- Anti-vibration pads steady the spin cycle
- Wood top reads as furniture not equipment
- Flat panel shaker and double door drawer styles
Cons
- 400 lb capacity is the lowest in this group
- Lowest average rating among these picks
- Only 16 in of lift
- Capacity and price make it weak value
The Ilyapa stand is the one here that looks like a cabinet instead of a metal frame. The top and drawer front are wood with a scratch-resistant finish, and you can choose flat panel, shaker or double door drawer styles to match your laundry room.
The 28-inch universal platform has a full-width storage drawer plus a second level, and anti-vibration pads are included for steadier spin cycles. Samsung, LG, GE and Maytag are all listed as compatible.
At 16 inches of lift it sits in the middle of the range. That is enough to take the drum off the floor comfortably but not enough to fully stand at it.
I want to be direct about the weakness here. The 400-pound capacity is the lowest figure among all ten pedestals in this guide, and that is well below the 600 to 800 pound ratings on the steel frames. Full-size washers can approach that number loaded.
What to check before you order
Look up the dry weight of your washer and add the weight of a full load. If the total is anywhere near 400 pounds, choose a steel frame with an 800-pound rating instead of this one.
Also confirm you want the drawer front aesthetic. It is the reason to buy this stand and it does mean the underside is not an open shelf.
Where it falls short
The capacity rating, combined with a price close to the 800-pound frames, is a hard combination to justify. The 4.0 average here is the lowest of the ten, and the review base of 61 is thin.
If you like the look but not the numbers, the cabinet-style approach worth considering is a custom wood build sized to both machines.
9. ZealWe 2-Pack 29-Inch Laundry Pedestals with 22 Inch Lift
ZealWe 2 Pack 29″ Laundry Pedestal for Washer and Dryer,700LBS CAP,Black
Lift: 22 in
Capacity: 700 lb
Size: 29 x 29 x 22 in
Two pedestals
Pros
- Sold as a matched 2-pack so both machines match
- Tallest adjustable lift here at 22 in
- 700 lb steel frame reduces vibration and noise
- Telescopic basket rack plus bottom storage cabinet
- Adjustable legs level uneven floors
Cons
- Highest cost per pedestal of the ten reviewed
- Only a six-month warranty
- Adjustable corner panels add assembly steps
Almost every pedestal on this list is sold as one unit, which quietly doubles the cost when you need a pair. This one includes two. If you are elevating a washer and dryer side by side, that removes the most common ordering mistake in this category.
The lift is 22 inches, the tallest adjustable height here, using four adjustable legs. That extra height also helps on uneven floors in older homes, where a fixed-leg frame will rock. The 700-pound steel frame is rated to reduce both vibration and noise.
Storage is a telescopic laundry basket rack plus a bottom storage cabinet. The four-panel corner design can be installed where needed to stop the machine from creeping sideways during a heavy spin.
Owners are generally happy with the convenience of the pair arriving together and matched. The two things that get mentioned as drawbacks are the six-month warranty, which is the shortest here, and the extra assembly steps from the adjustable corner panels.
What to check before you order
Confirm you actually need two. If you are only elevating a single machine, this doubles a footprint you may not have room for in a narrow laundry closet.
Check total height. A 22-inch pedestal plus a 39-inch dryer is a tall stack, and you need the ceiling clearance for it.
Where it falls short
The per-pedestal cost is the highest of the ten pedestals here, and a six-month warranty on a steel frame is thin. If the budget is the deciding factor, a pair of the universal 18 to 20 inch frames will cost meaningfully less.
10. DTK Washer and Dryer Pedestal with 23 Inch Lift and Hidden Storage
DTK Washer and Dryer Pedestals, Washing Machine Stand with Laundry Basket Shelf, Universal Fit Laundry Pedestals with Hidden Storage and Three Side Doors, 800LBS Capacity
Lift: 23 in
Capacity: 800 lb
Size: 29.2 x 29.2 x 23 in
Alloy steel
Pros
- Tallest lift here at 23 in
- 800 lb alloy steel capacity
- Hidden storage behind three side doors
- Built-in drain pan and anti-slip strips
- One year manufacturer warranty
Cons
- Drain hose is not included
- One pedestal per order so pairs need two
- Smallest review base of the group
The DTK pedestal gives you the most lift in this roundup at 23 inches. That is close to standing at the drum, and it is the option to look at if bending is the reason you are shopping for a pedestal at all.
The 29-inch universal top fits Samsung, LG, Whirlpool and other standard machines, and the 800-pound alloy steel frame sits at the top of the capacity range. Anti-slip strips on the top panel damp vibration where the machine feet land.
Storage is unusually well thought out for an open steel frame. There is a pull-out shelf for laundry baskets and hidden storage behind three side doors, so the cabinet area can be closed off rather than left on display.
A built-in drain pan is included to protect the floor. The hose is not, so you will need to source one and route it, which is the single most common complaint in owner feedback about this model.
What to check before you order
Measure upward. A 23-inch pedestal plus a machine is a tall assembly, and a dryer stacked on top needs real ceiling clearance. This is not a pedestal for a low closet.
Also confirm the three side doors will open in your space. They need swing room in front of the pedestal.
Where it falls short
Only one pedestal is included, so a matched pair means two orders. And with 29 owner reviews, this is the smallest evidence base in the roundup, so treat the 4.4 rating as encouraging rather than proven.
If you are furnishing an adjoining room off the same laundry space, our picks for space heaters for large rooms and whiteboards for homeschool rooms cover the utility spaces that often sit next to it.
Why Brand-Specific Pedestals Are Not Interchangeable
This is the section that prevents an expensive mistake, so read it before you pick anything above.
Brand-specific pedestals attach to the machine itself. The Samsung pedestals in this roundup are made for Samsung 27-inch front loaders and physically bolt to the cabinet bracket. An LG pedestal uses a different bracket position and a different machine width, and neither brand makes a version that fits the other.
Top-loaders are the other common mismatch. Several of these frames are listed as front-load only, because a top-load lid and its hinge need clearance that a tall frame removes. Confirm your machine type before ordering.
Universal frames like the VEVOR, Royxen, DTK and EZ Laundry models are a separate category. They sit under the machine rather than attaching to it, so they work across brands as long as the footprint fits inside the top plate.
The practical rule: if you already own your machines, buy brand-specific if you want a matched finish and a hard connection. If you are buying machines and pedestals together, or own machines from different brands, a universal frame is the safer bet.
And plan on two. Almost every pedestal here sells as a single unit, so a washer and dryer pair means two orders and roughly double the outlay.
Pedestal vs Stacking Kit: Which Should You Choose?
A pedestal puts the machines side by side and raises both. A stacking kit puts the dryer on top of the washer and raises the pair by roughly the height of a stacking bracket. They solve opposite problems.
Choose a stacking kit when floor width is the constraint. In a narrow closet, stacking gives you the full drying function in the footprint of one machine. The trade-off is that the dryer door opens at roughly your chest height and you need a shelf above for detergent.
Choose a pedestal when storage is the constraint, or when someone in the household cannot manage a high dryer door. The machines sit side by side at a reachable height, and the space underneath holds baskets and supplies.
A stacking kit also has to be brand-matched to the machine, just like a pedestal. Compatibility rules are identical.
How to Measure Your Washer Before Buying a Pedestal
Take ten minutes with a tape measure and you will not need to return anything.
Measure the machine footprint including the door. A front-load washer door can add several inches of depth when it swings open, and you want that clearance against the wall, not against the pedestal edge.
Measure the floor area you have and compare it to the pedestal footprint, not the machine footprint. The 29-inch frames in this roundup need a 29 by 29 inch square of level floor, plus room to slide the machine on from the front.
Measure your vertical clearance. Add the pedestal height to the machine height, then add the dryer on top if you are stacking. Older closets are often shorter than people expect once you account for ceiling slope and existing shelf brackets.
Finally, check hoses and outlets behind the machine. You need reach for the water supply, the drain hose and the dryer vent, plus a grounded outlet that is not behind the pedestal frame.
How We Chose the Best Washer Pedestals
We picked ten pedestals that span the decisions people actually face: brand-matched OEM drawers, universal steel frames, a low-rise riser and a matched two-pack. That spread reflects what shows up in real laundry rooms rather than one brand’s catalogue.
For each one we weighed lift height against machine height, load capacity against realistic loaded washer weights, storage type, footprint, brand compatibility, warranty length and material quality. Where listing data contradicted itself, we flagged it rather than picking the better-sounding number.
We also read the owner reviews looking for repeated patterns rather than single complaints. Transit damage, missing hardware, conflicting fit information and heavy units that are hard to reposition came up often enough to influence our notes.
One disclosure: we may earn a commission when you buy through links on this page. That does not change the order of anything here or the standards we applied.
What to Look for in a Washer Pedestal
Height is the first filter. Anything under 8 inches is a riser that will not meaningfully change your bending. The ergonomic sweet spot is 14 to 20 inches, which puts the drum between mid-thigh and waist. Above 22 inches you gain storage space for a full basket but you also need the ceiling height to match.
Load capacity comes next. A loaded full-size washer commonly runs in the region of 250 to 300 pounds, and a loaded gas dryer adds roughly 150. Any steel frame rated at 660 pounds or higher covers both comfortably. Be cautious with anything rated at 400 pounds, which is what our number 8 does.
Storage type depends on your room. A pull-out drawer keeps detergent, softener and dryer sheets in one tidy place and reads as furniture. An open shelf is cheaper, easier to reach into and shows everything. A cabinet with doors hides clutter. Telescopic basket holders are the most useful for a tall frame because you can pull a basket out without crouching.
Brand compatibility decides whether you need OEM or universal. OEM gives a matched finish and a bolted connection. Universal gives you freedom across brands at the cost of appearance. Make this call before you shop, not during.
Anti-vibration features are worth checking because a front-load washer walking across the floor is the most common complaint in this category. Look for EVA or rubber pads, non-slip strips on the top plate, or anti-vibration hardware in the box.
Material and coating decide how it ages. Powder-coated or rust-resistant steel holds up in a damp laundry room far better than unfinished steel. Adjustable or non-slip feet matter more than people expect on an uneven floor.
Leak protection is the sleeper feature. A pedestal with an integrated drain pan catches water from a failed hose before it reaches the floor, and in a laundry room on an upper floor that is cheap insurance.
Warranty length is a rough proxy for manufacturer confidence. Two years on a steel frame is a good signal. Six months is not.
Finally, remember the pair problem. Unless a product ships as a two-pack, you are ordering twice. Measure for two pedestals side by side plus the machines, and check that your doorway will take the assembled width before the first one arrives.
Frequently Asked Questions
Are laundry pedestals worth it?
For most households with a front-load washer, yes. A pedestal raises the drum from shin height to roughly waist height, which removes most of the bending from every load, and it creates storage underneath for baskets and supplies. It also keeps the floor open so spills are easier to clean. The main case against it is a laundry closet too tight to lose any width, or a stacking setup where a kit gives you drying capacity for less floor space.
Are all washer dryer pedestals the same?
No. They fall into two categories. Brand-specific pedestals are made by the appliance manufacturer and physically attach to compatible machines of that brand only. Universal aftermarket frames are standalone steel or wood platforms that any machine can sit on as long as the footprint fits within the top plate. Brand-specific units give you a matched finish and a hard connection. Universal frames give you flexibility across brands but nothing bolts to the machine.
Are LG and Samsung washer pedestals interchangeable?
No. They use different machine widths, different foot and bracket positions, and different attachment points. An LG pedestal fits only compatible LG front-load machines and a Samsung pedestal fits only compatible Samsung front-load machines. Neither brand makes a cross-compatible version. If you already own your machines, match the pedestal to the brand and model. If you are buying both at once, a universal frame removes the risk entirely.
Will my new washer fit on my old pedestal?
Sometimes, but check before you assume it. Compare the new machine footprint to the pedestal top plate, confirm the machine is front load rather than top load, and check that the required attachment bracket exists on the new model. Height changes matter too: a taller or shorter machine can change your total clearance and whether a dryer fits on top. Measure the new machine width and depth before ordering, and keep the shipping box until the pedestal is assembled and tested.
How much weight can a laundry pedestal hold?
It depends on the model. Steel frames in this roundup are rated from 660 pounds up to 800 pounds, while the wood-top Ilyapa stand is rated at 400 pounds. For context, a loaded full-size washer commonly reaches the mid-200s in pounds and a loaded gas dryer adds roughly 150 more. Most 660-pound and 800-pound steel frames handle a full pair comfortably. A 400-pound rating leaves little margin, so we would choose a heavier frame for a full-size set.
How tall should a laundry pedestal be?
For ergonomics, 14 to 20 inches is the useful range. Below about 8 inches you are dealing with a riser that keeps the machine off the floor without meaningfully reducing bending. Above 22 inches you gain room for a full laundry basket underneath but you also need the ceiling clearance for a stacked dryer. If someone in the household has limited mobility, the taller end of the range helps most, and some low-profile risers are built to meet accessibility standards when paired with a compatible machine.
The Best Washer Pedestal for Your Laundry Room
The Samsung 27-inch pedestal with the pull-out drawer takes our overall pick because it is the option most people need: a matched finish, a bolted connection, a genuinely useful lift and the largest body of owner feedback in this roundup at 4.4 stars across 849 reviews.
If you want leak protection, the EZ Laundry frame with its integrated drain pan and 800-pound capacity is the more practical choice, and it works across major brands. On a tight budget the VEVOR pedestal gets you a solid steel frame with shock pads for less than half the price of the OEM units.
For the tallest setups, the DTK at 23 inches or the Royxen at 20 inches give you basket clearance and the least bending. Just remember that nearly everything here sells as a single pedestal, so measure for two before you order.
Whichever route you take, match the pedestal to the brand and model you already own, or choose a universal frame and remove the guesswork. A few minutes with a tape measure will save a return.