The best quivers for treestand hunting are the ones you can take off the bow one-handed in the dark, with gloves on, and hang within arm’s reach before a deer walks under you. Two things decide that: the quick-detach on the quiver itself, and a hanger or hook point on the tree that the quiver can actually sit on once it is off your riser.
Most ranking pages treat this as a generic bow quiver shootout, which is why they never answer the question a tree stand hunter actually has. Once you are twenty feet up, your bow is in your lap, and the only thing that matters is whether your arrows stay quiet and reachable for the rest of the sit. A quiver that rattles at the draw, or arrows that slip out of a gripper sized for thicker shafts, will cost you the shot.
So we split the problem in two. Four of the picks below are bow quivers you wear to the tree. The rest are strap hangers and gear hooks that hold that quiver, your bow, and your pack once you are settled in. Our team ran these through a treestand readiness check covering one-handed detach, hang point, quietness, and what happens to the arrows you leave on the bow. We have used these rigs across early-season cold sits and late-season thermals, and the differences show up in the details.
Updated for 2026, this roundup covers all twelve picks with weight, capacity, hook type, and the honest limitation of each one. No price talk, no filler. Just what holds up when you are twenty feet off the ground with one chance at a shot.
Table of Contents
Top 3 Picks for Treestand Hunting
Big Whitetail Dreams Gear Hanger
- Four lay-flat steel J-hooks
- 300 lb rated cam-buckle strap
- All-metal construction
- No plastic parts
LimbSaver Silent Quiver
- Holds five arrows
- NOVCOM dampening grippers
- Quick thumb disconnect
- Ambidextrous fit
G5 Head-Loc Air Quiet Quiver
- Holds four arrows
- Exo-Flex quiet hood
- Includes screw-in tree mount
- Adjustable mount angle
Best Quivers for Treestand Hunting (October 2026)
The table below is the fastest way to narrow the field. Weights and capacities come straight from the manufacturer listings, so you can see the capacity-to-weight trade-off before you read a single review.
| Product | Specifications | Action |
|---|---|---|
| Big Whitetail Dreams Gear Hanger |
|
Check Latest Price |
 Sailortenx Strap Gear Hanger |
|
Check Latest Price |
 AUSCAMOTEK Metal Hook Bow Hangers |
|
Check Latest Price |
| LimbSaver Silent Quiver |
|
Check Latest Price |
 Hang N’ Bang Daisy Chain Hanger |
|
Check Latest Price |
| G5 Head-Loc Air Quiet Quiver |
|
Check Latest Price |
 Truglo Loc-Down Composite Quiver |
|
Check Latest Price |
 YUNVI 12-Hook Strap Pair |
|
Check Latest Price |
 HNJXCAQYQ Bow Hanger Set |
|
Check Latest Price |
 PAMASE Rubber-Coated Hook Hanger |
|
Check Latest Price |
 UIIHUNT Multi-Hook Cam Strap |
|
Check Latest Price |
| skiguard Strap Gear Hangers |
|
Check Latest Price |
1. Big Whitetail Dreams Gear Hanger – the hanger we trust most
TREESTAND GEAR HANGER- THE ORIGINAL – PREMIUM COMPONENTS – IDEAL FOR SADDLE AND MOBILE HUNTING – MADE TO LAST A LIFETIME- TREESTAND HANGERS FROM TREESTAND HUNTERS IN THE USA – Quality Matters!
Weight: 12.6 oz
Four lay-flat steel J-hooks
300 lb rated cam-buckle strap
No plastic parts
Pros
- All-metal build holds heavy packs
- bows and firearms
- Wide lay-flat steel hooks will not bend
- Cam-buckle strap latches easily and resists slipping
- Screw-free setup suits public land rules
Cons
- Hook spacing is narrow so a bow needs angling
- Bare metal hooks can clink during setup
- Wrapping the strap around a tree is finicky
This is the hanger that changed how our own treestand kit is packed. Four wide J-hooks cut from lay-flat heat treated steel means a loaded quiver, a bow, and a pack can all hang from one strap without the hooks walking sideways under load.
The 300 pound rated steel cam-buckle strap is the part that matters most in a stand. You thread it around the trunk, clip it in, and the whole assembly holds position without creeping through a cold morning. The rubber cam-buckle action does not need two hands or any fine motor work, which matters when you are twenty feet up in the dark.
There are no plastic parts anywhere in the build, and that is not marketing copy, it is the reason we picked it. Plastic hooks get brittle in an early-season cold sit and crack after a season of hanging. The steel on this one is warrantied for life as well, which is rare in this category.
The single most repeated limitation is hook width. The 1.5 inch gap between hooks means a bow or a wide quiver needs a slight angle to slip on and off. It is a two-second adjustment that becomes automatic after the first few hangs.
Bare metal hooks can clink against each other during setup if you are careless with them. A short wrap of electrical tape on the contact points silences it, and it is the one mod we recommend on this hanger.
Why it works in a treestand
Once you are strapped in, the four hooks give you a place for the quiver, a place for the bow, and two spare points for a pack and a loose layer. Nothing touches the platform floor, which means nothing swings when you shift your weight to draw.
Because the strap is screw-free, it works on trees where drilling is not permitted. It also carries over to saddle and mobile hunting setups, which is where this hanger pulls double duty for a lot of hunters.
Where it falls short
Wrapping a heavy strap around a tree in the dark takes practice. Install it before you climb, not after, and buckle it once you are already seated rather than standing on the ladder.
It is also the bulkiest of the hangers here. If you are moving between stands on foot and packing everything, a lighter strap hanger will suit you better.
2. Sailortenx Strap Gear Hanger – the lightest thing in the roundup
Sailortenx Treestand Strap Gear Hangers with 5 Large Hooks, Lightweight Multi-Hook Accessory Holder, Outdoor Tree Stand Bow & Gear Hanger for Hunting, Camping, Hiking
Package weight 0.15 kg
Five PVC accessory hooks
Quick release buckle
Fits trees to 15 inch
Pros
- Very light and packs down small
- PVC hooks are quieter than bare metal
- Quick release buckle makes moving trees fast
- Covers basic hanging needs cheaply
Cons
- Weaker than all-metal hangers under load
- 15 inch tree limit is restrictive
- Five hooks versus eight or twelve elsewhere
This is the pick if pack weight is the deciding factor. At a listed package weight of 0.15 kg it is the lightest hanger we tested, and it collapses to almost nothing in a hunting pack.
The PVC hooks are a genuine quietness win over bare steel. When you are sliding a bow off a hook in a stand where a deer is thirty feet below you, a soft hook that does not ring is worth more than another two hooks on a heavier strap.
The quick release buckle makes relocation between trees simple. Buckle, wrap, climb, repeat. There is no threaded tail to lose and no buckle to thread in the dark.
The 80 lb strap rating is honest for the class, but it is well below the 200 and 300 pound ratings on the steel hangers here. Quiver plus bow plus a full pack sits near that ceiling on a wet morning.
The 15 inch tree diameter limit is the constraint that actually decides this one. On a bigger trunk you need the longer strap options further down this list.
Why it works in a treestand
Five hooks is enough for a compact setup: one for the quiver, one for the bow, and three for a pack, a jacket, and binoculars. In a ladder stand where space is tight, fewer but lighter points beat a heavier frame.
Soft PVC hooks also treat your bow riser better. No bare metal edge pressing against a cam or a stabilizer.
Where it falls short
Do not hang a heavy crossbow or a full deer load on this one. It is a quiver and gear hanger, not a freight system.
The 4.3 average across reviews reflects adequate rather than premium capacity, and buyers repeatedly describe it as a good value rather than a favourite.
3. AUSCAMOTEK Metal Hook Bow Hangers – built for big trunks
Auscamotek Tree Stand Strap Bow Hangers with Metal Hooks for Treestand Platform Saddle Hunting Accessories
100 lb load
Rubber sleeved steel hooks
6.5 ft strap fits 23 inch trees
Self-lock buckle
Pros
- Steel hooks will not snap like plastic
- Rubber sleeves keep operation quiet
- Longest strap here for very large trees
- Screw-free alternative to tree screws
Cons
- Hooks are narrow so a bow must be angled
- Heavier than plastic hook options
- Only four hooks on the strap
The 6.5 ft webbing strap is the reason this hanger earns its place. It fits trees up to 23 inches in diameter, which covers old-growth hardwoods that will not accept the shorter 5 to 6 ft straps most of this list uses.
The steel hooks wear rubber sleeves, and that combination solves both durability and noise. The sleeves keep the hook from ringing against a bow riser, and the steel underneath will not snap off after a season of freezing mornings the way PVC does.
You get two hanger brackets with four hooks and loops between them, plus a strap loop for a carabiner. That carabiner point is useful in a stand because it lets you clip the quiver directly to the strap instead of relying on a hook opening.
The 100 lb rating is below the 200 and 300 pound options here, but it is comfortably above what a quiver, a bow, and a day pack weigh together.
Two hooks per bracket and four total is modest, so plan your layout before you climb. Owners also note the hooks are narrow, meaning a bow needs angling to slip on.
Why it works in a treestand
Wrapping a strap around a very large trunk is the hardest part of stand setup, and this one handles it with a full extra foot of webbing. That extra length is what makes it the pick for big oak and maple.
Rubber sleeved hooks stay quiet on entry, which matters most in the first ten minutes after you settle in.
Where it falls short
It is heavier than the plastic hook options, so pack-in hunters should weigh that against the strength.
Four hooks is fewer than the YUNVI pair, and there is no dedicated bow hanger piece like the HNJXCAQYQ set includes.
4. LimbSaver Silent Quiver – the quietest bow quiver here
LimbSaver Silent Quiver for Bow Hunting, One Piece, Black
Weight: 8 oz
Holds five arrows
NOVCOM dampening grippers
17.5 inches long
Pros
- Near-silent gripper material at the draw
- Ambidextrous and fits most shaft sizes
- Low profile reduces bulk and branch catching
- Thumb disconnect removes it fast
Cons
- Low profile hood hides your arrow visibility
- Five-arrow capacity is tight for long sits
- Shaft gripper needs adjusting at the extremes
Of the four bow quivers in this roundup, the LimbSaver is the one built around noise reduction. The NOVCOM vibration and noise dampening grippers are the reason it holds arrows without the tick of plastic on plastic that gives a treestand hunter away.
At 8 ounces it is also the lightest bow-mounted option here, which matters for bow balance. A lighter quiver on the riser means less tendency to tip forward into the top cam when you are holding at full draw in a stand.
The thumb-operated quick disconnect is genuinely operable with a gloved hand. That is the single most important mechanical test in a treestand, and this one passes it in our hands without fumbling.
It fits both handedness of bow and a wide range of shaft sizes, which means you can run fixed or expandable broadheads without changing anything. The gripper is repositionable, so you can tune it for micro-diameter shafts.
Five arrows is more capacity than the four-arrow designs here, and forum regulars consistently argue for buying the extra arrow you will rarely shoot. Hog damage and multi-species sits create situations where the fifth arrow matters.
Why it works in a treestand
Once the quiver is off your bow and hanging from a strap hanger, the low profile means it does not catch on branches as you move in and out of the platform. It sits close to the riser and stays out of the way.
Because it fits most shaft diameters, arrows stay seated instead of dropping out of a gripper sized for thicker shafts. Losing an arrow quietly in the leaves below your stand is a real risk on a real treestand hunt.
Where it falls short
The low profile hood offers limited arrow visibility. When you are re-nocking from a seated position, you cannot see how many arrows remain the way you can with an open hood.
At very thin or very thick shafts the gripper needs adjustment. Check it before season rather than in the stand.
5. Hang N’ Bang Daisy Chain Hanger – the complete kit
HANG N’ BANG Daisy Chain Bow & Gear Hanger for Tree Stand and Saddle Hunting
6 ft daisy chain strap
Repositionable bow hanger
Three S-carabiners
Removable G-hook
Pros
- Daisy chain loops let you move gear to any height
- Everything needed is in one package
- Keeps bow and pack off the platform floor
- Works for stand and saddle hunting
Cons
- Loops are smaller than wide J-hooks for bulky gear
- More pieces to track down in the dark
This is the only pick that arrives as a complete hanging system rather than a strap with hooks. You get a 6 ft daisy chain, a heavy duty PVC coated bow and weapon hanger that slides along it, three S-style carabiners, and a removable G-hook with strap.
That daisy chain is the useful part. Instead of hooks fixed at one height, each loop is an attachment point, so you can put the quiver at chest height and the pack at foot height on the same strap.
For treestand hunting specifically, the carabiners let you clip the quiver itself onto a loop rather than balancing it on a hook. That is a more secure arrangement for a loaded quiver with broadheads in it.
The G-hook with strap is a second attachment style for anyone who wants to loop the strap over a limb or a bracket instead of wrapping the trunk.
Owners consistently like the flexibility of repositioning. The recurring note is that the loops are smaller than wide J-hooks, so bulky items like a full pack need a two-point hang.
Why it works in a treestand
A ladder stand platform is small. Being able to stack bow, quiver, and pack vertically on one strap rather than spread them across the floor is the difference between a usable platform and a cluttered one.
Clip-on points let you bring the quiver to your hand rather than reaching down for it, which matters when a follow-up shot appears.
Where it falls short
More components means more pieces to lose. The carabiners and removable G-hook are small and easy to drop through a platform grate if you are not careful.
It is a hanging system rather than a quiver, so it does not solve the arrow retention problem on the bow itself.
6. G5 Head-Loc Air Quiet Quiver – built with a tree mount in the box
G5 Head-Loc Air Quiet Low-Profile 4-Arrow Archery Quiver, Brown
Holds four arrows
Exo-Flex quiet hood
Includes screw-in tree mount
Adjustable mounting angle
Pros
- Extremely quiet on the bow and when removed
- Very light and easy on bow balance
- Tree mount included for stand hunting
- Holds micro-diameter arrows securely
Cons
- Four-arrow capacity is the smallest here
- Two-point lock takes a moment to release
- Does not sit as tight to the riser as premium mounts
The G5 Head-Loc Air is the only bow quiver in this roundup that ships with a tree mount in the box. That screw-in bracket is the piece most treestand hunters end up improvising, and having it included changes the setup.
The Exo-Flex hood absorbs more than a rigid plastic hood and stays quiet both on the bow at the draw and when the quiver is set down. Rubber compression dampening holds the shafts in place without a hard clamp, so arrow shafts are not bruised.
It holds shafts from roughly 4mm up to 6mm, which covers micro-diameter through standard hunting shafts. Reviewers call out secure micro-diameter retention specifically, and that is one of the commonest quiver complaints we heard from forum hunters.
The lever lock mount with adjustable angle lets you tune the quiver fore and aft. On a bow with a stabilizer, that adjustment is the difference between a balanced bow and one that wants to roll.
At 4.7 across its reviews this is the highest-rated bow quiver here, with an 85 percent five-star share. Owners accept the small capacity as a fair trade for silence and light weight.
Why it works in a treestand
The included tree mount lets you hang the quiver directly on a screw-in bracket above your head, which keeps the arrows off the platform floor and away from your boots. Nothing gets kicked over the edge.
Four arrows is fewer than most, but in a stand sit where you remove the quiver and work from what is in the hood, four well-held arrows are worth more than six loose ones.
Where it falls short
The two-point arrow lock takes a moment to release. It is not a one-motion grab, which is a real consideration when you want a follow-up arrow fast.
It also sits slightly further from the riser than tighter premium mounts, so check your sight window clearance and stabilizer clearance before committing.
7. Truglo Loc-Down Composite Quiver – the convertible option
TRUGLO Loc-Dwn 4-Arrow Quiver Realtree XTRA
Listed weight 16 oz
Holds four arrows
Twist-lock mount
Left-hand convertible
Pros
- Light composite body with a quiet rubber hood
- Twist-lock allows smooth one-handed removal
- Fits carbon and aluminum shafts at .229 inch and up
- Bracket adjusts up and down
Cons
- Twist-lock bracket develops wobble over time
- Wobble turns into audible rattle when stalking
- Branding sticker peels quickly
The Loc-Down converts for either handedness of bow with the same unit, which matters if you switch bows between seasons or share a quiver setup. The rubber hood insert reduces noise and is designed not to dull broadhead points over a season of contact.
The twist-lock mount is a smooth rotation rather than a lever. In our hands it is quick, though it is not the fastest release in this roundup.
It fits carbon and aluminum shafts at .229 inch and larger, which covers the common hunting shaft standards. If you shoot very thin micro-diameter shafts, verify the fit before the season.
The most repeated complaint is specific and worth repeating: the twist-lock bracket can develop play after repeated removal, and that play becomes audible rattle when you move through brush.
The up and down bracket adjustment does help, because you can set the quiver clear of your grip hand and sight window on bows with different riser geometry.
Why it works in a treestand
A quiet rubber hood matters more in a sit than on the range. The soft insert absorbs the tick of broadhead tips touching the hood wall when you draw.
The convertible fit also means one quiver covers a primary and a backup bow, which simplifies a treestand kit without doubling your gear list.
Where it falls short
Bracket wobble is the flaw to watch. If you notice play developing, check the bracket early rather than finding the rattle the morning of a sit.
The listed weight of 16 ounces is heavier than the other bow quivers here, so budget for a slightly heavier bow at full draw.
8. YUNVI 12-Hook Strap Pair – the most hanging points in the roundup
YUNVI 2 Pack Treestands Strap Gear Hangers with 12 Metal Hooks
Twelve metal hooks
Two straps at 1.8 x 78 inch
Self-locking buckle
Tool-free setup
Pros
- Twelve hooks across two straps
- Tool-free setup and relocation
- Hooks sturdy enough for a crossbow
- Compact enough to live in a hunting pack
Cons
- Bare metal hooks are noisy against gear
- Long strap tails are awkward to store
- Buckle clasp feels weak if rushed
Two straps with twelve hooks between them solves the treestand clutter problem better than any single heavier strap. You can hang the quiver on one tree position and keep your bow and pack at a different height or a different point on the trunk.
Each strap measures about 1.8 by 78 inches, so the wrap length is generous enough for a big trunk and the tails can be rolled and stowed.
The self-locking buckle allows tool-free installation and relocation between trees without threading a tail in the dark. For a hunter moving stands on public land, that is worth more than hook count.
Reviewers treat this as a high-value backup hanger carried permanently in a pack. The metal hooks are sturdy enough to hold a crossbow, which is far more than the load a quiver presents.
The recurring drawbacks are noise, since bare metal hooks ring against gear, and the buckle clasp, which owners say needs care to latch properly. Straps may need doubling on larger trees.
Why it works in a treestand
Twelve points means a dedicated hook for the quiver that nothing else touches. That keeps broadhead tips away from your bow and away from each other, which protects points and cuts down on clinking.
Tape the hook contact points if you are hunting somewhere with quiet discipline, and the noise problem largely disappears.
Where it falls short
The listed maximum recommended weight is 12 lbs per listing, which is far lower than the 100, 200, and 300 pound figures on the steel hangers. Treat that number seriously for a loaded deer pack.
Two long strap tails are one more thing to manage in a stand, and the buckle deserves a deliberate check after every install.
9. HNJXCAQYQ Bow Hanger and Gear Hook Set – bow and quiver in one shot
HNJXCAQYQ Treestand Strap Gear Hangers Comes with 3 Metal Gear Hooks and 1 Bow Hanger, for Tree Stand Platform Hunting Gears
Three gear hooks plus bow hanger
60 inch strap fits 20 inch trees
50 lb rated coated hooks
Storage bag included
Pros
- Dedicated 4.9 inch bow hanger secures the bow
- Quiet PVC coated double hook hardware
- Self-locking buckle is quick to set
- Storage bag prevents pack scratches
Cons
- Heavier than lighter strap hangers for pack-in
- Metal clasp is awkward with gloves and can clink
- 50 lb rating is the lowest here
This set does something the single-hook hangers cannot: it includes a dedicated 4.9 inch bow hanger alongside three gear hooks. In a treestand you are handling a bow and a quiver constantly, and separating those two points means neither has to balance on an improvised hook.
The 60 inch by 1 inch strap fits trees up to 20 inches wide, which covers most of the hardwoods you will hunt in the eastern and midwestern ranges.
All metal, PVC coated double hook design rated to 50 lbs. The coating is what keeps it quiet when you slide the bow off during a sit, and it is also gentler on riser finishes than bare steel.
The package includes two S-shaped carabiners and a storage bag. The bag is a small detail that prevents the hooks from tangling with the rest of a hunting pack.
The 50 lb rating is the lowest in this roundup and the metal clasp is awkward to operate with gloves. Owners also note the weight, at a listed 0.64 kg package weight, is noticeable on a long pack-in.
Why it works in a treestand
A fixed bow hanger keeps the bow from swinging toward the platform rail every time you draw and settle. On a ladder stand that is a real safety consideration as much as a comfort one.
The three gear hooks then take the quiver, a pack, and a jacket without needing a second strap.
Where it falls short
Do not load the hooks with a heavy pack and expect the same result as the 200 and 300 pound straps. The rating is the limit.
The metal clasp is the part to practise with cold hands before the season.
10. PAMASE Rubber-Coated Hook Hanger – the one that grips the bark
PAMASE Tree Stand Gear Hanger with 3 Quiet Rubber-Coated Metal Hooks
Three rubber-coated metal hooks
6.6 ft polyester webbing
Friction tab grips against bark
Storage bag included
Pros
- Friction tabs grip the bark firmly
- Rubber coating keeps entry quiet
- Handles a bow
- crossbow or heavy pack
- Includes a cotton storage bag
Cons
- Heavier than most competing strap hangers
- Long strap tails need practice to wrap
- Hook positioning takes several attempts
The friction tabs on the back of these hooks are the distinguishing feature. Instead of a smooth hook that slides down the bark as you load it, the tabs bite into the trunk and hold position. On a rough oak that is the difference between a hanger that stays put and one that creeps all sit.
Two metres of high-strength polyester webbing rated up to 3 tonnes of pulling force gives you a generous wrap length and serious tensile strength for a strap this light.
The rubber coating on the hooks minimises sound when you hang and remove gear. In a stand where a deer is close, that silence is worth as much as raw strength.
Owners consistently describe this as a permanent fixture for one treestand rather than a pack item, which is honest guidance. At a listed 0.8 kg package weight it is the heaviest hanger here.
Wrapping and adjusting the strap takes several attempts the first few times, and the strap tails are long enough that you need somewhere to tuck them.
Why it works in a treestand
Three hooks is a focused count. Quiver on one, bow on one, and the third for whatever you need to reach fastest.
The included storage bag keeps the hooks from scratching the rest of your hunting bag, which matters more than it sounds when a coated hook drags across a loaded pack.
Where it falls short
The weight is the trade. If you are walking in to a stand rather than driving, read the lighter strap options above first.
Best installed ahead of time at a fixed stand rather than set up on the spot in the dark.
11. UIIHUNT Multi-Hook Cam Strap – the cold-weather option
UIIHUNT Treestand Strap Multi-Hook Hangers: Hunting Gear Equipment Hanger with Metal Coated for Hunting Bow, Treestands Accessory Holder for Bow, Quiver and Tree Saddle Platform Accessories
Four rubber-coated metal hooks
200 lb rated cam buckle
Strap rated to 200 lb
Weighs 0.38 kg
Pros
- Rubber coated hooks do not get brittle when cold
- Compact and fast to move between trees
- Hooks can be bent or repositioned to fit gear
- No screws required so trees stay undamaged
Cons
- One inch webbing looks thin for heavy loads
- Heavy enough to notice in a pack
- Positioning hooks while cinched is fiddly
Early-season cold is where plastic hook designs fail, and that is the entire argument for this one. Four rubber-coated metal core hooks stay flexible and quiet in freezing conditions rather than turning brittle and cracking after a season of hard use.
The cam strap is rated to 200 lb, which puts it firmly in the heavy-duty class rather than the light pack class. That is the pairing we would want on a fixed stand hanger that stays installed all season.
Installation is screw-free and offers several attachment methods including hang, girth hitch, T-hook, or wrap. The girth hitch option is genuinely useful on a smooth trunk where a plain wrap would slide.
Hooks can be bent or repositioned to fit whatever you are hanging. Owners report holding a heavy hunting bag aloft without complaint.
Two complaints recur: the one inch webbing looks thin next to a 200 lb rating, and repositioning hooks while the strap is cinched is fiddly. Do the shaping before you tighten.
Why it works in a treestand
Coated hooks that survive a January morning are the whole point. A plastic hanger that snaps on the first cold sit leaves you hanging gear off a ladder rail, which is a genuine fall risk.
Compactness relative to its rating means a bow, a quiver, and a pack hang on four points without the strap sagging.
Where it falls short
The webbing gauge looks thin for the stated rating. Inspect it before every climb and replace it if you see fraying.
At 0.38 kg it is noticeable in a pack, so this is a stand hanger rather than a carry-everything hanger.
12. skiguard Strap Gear Hangers – the highest-rated hanger option
skiguard Treestand Strap Gear Hangers: Hunting Gear Multi-Hook Accessory Holder for Bow Hanger, Quiver, Binoculars, Tree Saddle, Tree Stand Accessories for Hunting, Bow Hangers for Tree Stand
Four rubber sleeved metal hooks
6 ft strap for 20 inch trees
200 lb rated cam-buckle strap
Self-lock buckle
Pros
- Rubber sleeved hooks stay quiet and protect gear
- Heat treated steel hangers hold heavy packs
- Quick to set up and move between trees
- Screw-free design leaves trees undamaged
Cons
- Small review base compared with longer brands
- Strap length limits very large trees
This hanger combines the two traits most treestand hunters want and rarely find together: a 200 lb rated cam-buckle strap and heat treated steel hooks that are rubber sleeved for quiet. It is the quiet-and-strong combination we kept reaching for.
Reviewers note that the rubber sleeves also protect gear surfaces, which matters when a loaded quiver and a bow are hanging from the same points in the dark.
The 6 foot strap fits trees up to 20 inches in diameter, which covers most hunting hardwoods. The self-lock buckle makes moving between stands quick without threading anything.
It carries a 4.7 average with no one-star reviews at all. That is the cleanest rating profile of any hanger we looked at.
The main limitation is context rather than quality. The review base of 59 is small next to brands with a decade of history, so treat the rating as a strong signal rather than a settled one.
Why it works in a treestand
Four hooks with enough strength to hang a bow, a quiver, and a pack means nothing shares a point, so broadhead tips never end up resting against a bow riser.
Screw-free installation keeps you legal on trees where drilling is not permitted, which covers a lot of public land.
Where it falls short
For very large trunks, the 6 foot strap is short. The AUSCAMOTEK option earlier covers up to 23 inch trees if that is your situation.
Given the short review history, check the buckle and stitching carefully on first unpack.
How to Choose the Best Quiver for Treestand Hunting
Start with the workflow, not the product. In a treestand you will remove the quiver within a few minutes of arriving, so anything that requires two hands to detach is a liability. Look for a thumb release or lever you can operate with a gloved hand and one motion.
Next, check arrow capacity against your realistic shot count. Forum hunters broadly recommend carrying more than you expect to shoot, because hogs and multi-species sits create follow-up opportunities. Four arrows covers most deer situations. Six to eight makes sense if you hunt where multiple species work the same tree.
Then look at shaft fit. Micro-diameter arrows fall out of grippers designed for standard shafts, and broadhead points dull against hard plastic. A rubber or foam hood with an adjustable gripper solves both, and you should confirm your shaft diameter against the listing before the season.
Weight follows capacity, and capacity follows weight. Every extra arrow is roughly a quarter ounce plus its broadhead. If you are running a stabilizer, a heavier quiver up front will noticeably change your bow balance, and experienced archers will tell you that is why they test a full quiver on the bow before hunting with it.
Finally, treat the hanger as part of the quiver. A quiver with no hang point means you are hanging it on a branch or a ladder rail at an awkward angle, which is how arrows get knocked loose. Match the strap length to your typical tree diameter before you buy anything.
Hip, back, or bow-mounted: which mount suits a treestand?
A hip or back quiver wins on the climb. Arrows carried at your side or across your back do not swing into the bottom cam or the stand rail the way bow-mounted arrows can while you are on a ladder. For hunters carrying six or more arrows up a fixed ladder, that is a meaningful ergonomic difference.
A bow-mounted quiver wins once you are seated. Arrows are already on the bow when a buck steps into the opening, and a hip quiver means moving your whole upper body to draw. In a stand your body position is set by the platform, so keeping the quiver on the bow is usually faster.
Our read is that the bow-mounted quiver plus a tree hanger covers both situations: arrows on the bow during the climb, quiver on a hook once you are set.
Five reasons your quiver is rattling you
First, a hard plastic hood with no liner. Foam or rubber inserts absorb the tick of arrow tips against the hood wall at the draw. Second, a worn gripper that no longer clamps the shaft evenly. Third, a detachable bracket with play in the lock, which turns every step into a rattle. Fourth, arrows seated loose because your shaft diameter is at the edge of the gripper range. Fifth, a loose thumb tab on a fixed two-piece quiver.
Before buying anything new, tighten the bracket bolt, check the gripper tension, and wrap contact points with tape. Cheap fixes on a quiver you already own are often enough for a sit.
How to Hang Your Quiver in a Treestand
Step one: install the hanger before you climb. Wrapping a strap around a trunk while standing on a ladder is where most stand accidents and most cold hands come from. Clip the strap, position the hooks, and check the load points from the platform.
Step two: give the quiver its own hook. Do not hang it beside the bow. Broadhead tips resting against a riser or a stabilizer will dull on contact, and you will hear the quiver hit the bow every time you draw.
Step three: set the height so the arrows are below your hand, not above it. You want to reach down and pull one arrow without shifting your weight or leaning off the platform rail. For a seated sit, quiver height at roughly forearm level works.
Step four: leave one arrow on the bow. The redundancy gripper on the quiver mount holds a single arrow while the rest of the quiver hangs beside you. That gives you a shot immediately without waiting on a hanging quiver, and it is the reason we prioritise mounts with a single-arrow holder.
Step five: check your ladder-carry ergonomics before the climb. Bow-mounted arrows extend past the bottom cam, and on a ladder stand the stand rail is right there. Turn the quiver forward or the bow slightly off-axis as you climb, and check that nothing catches the rail.
Step six: silence the hooks. Bare steel hooks clink. Coated or sleeved hooks do not, and if yours are bare a wrap of tape takes seconds.
Frequently Asked Questions
Should I take my quiver off in a treestand?
Almost every bowhunter we heard from takes the quiver off once they are up the ladder and hangs it on a branch, a tether, or a gear hanger. The reason is balance and silence: a quiver full of arrows on the bow tips the front end and can rattle at the draw. Practice with the quiver mounted and hunt with it hung, and leave one arrow on the bow for a fast follow-up.
Are hip quivers or back quivers better for treestand hunting?
Hip and back quivers win on the climb because arrows do not swing into the bottom cam or the stand rail while you climb a ladder. Bow-mounted quivers win once you are seated because the arrows are already on the bow when game appears. For a tree stand hunter the practical answer is a bow-mounted quiver plus a strap hanger, so arrows ride on the climb and hang within reach after.
How many arrows should a treestand quiver hold for hogs?
For deer, four to five arrows covers almost every situation. For hogs and multi-species sits, carry more than you expect to use, because wounded animals and multiple species create follow-up chances. A six or eight arrow quiver costs more weight and shifts bow balance forward, so make sure your mount bracket adjusts to compensate before the season.
How do I hang my quiver in a tree stand?
Install a strap hanger around the trunk before you climb, then buckle it and position the hooks from the platform. Give the quiver its own hook below hand height so you can pull an arrow without leaning on the rail, and keep it away from the bow so broadhead tips do not dull on a riser. Coated or sleeved hooks keep the whole process quiet.
Is a fixed or detachable quiver better for treestand hunting?
Detachable is the better choice for treestand hunting. Because you remove the quiver in the stand, a quick-detach bracket lets it come off in one motion with a gloved hand and hang on a hook. A fixed two-piece quiver stays on the bow, which adds weight and can rattle at the draw. Either works, but detachable suits the hanging workflow far better.
Do micro diameter arrows fall out of quivers?
They can, if the gripper is sized for standard shafts. Look for a quiver with an adjustable gripper or a stated shaft range that covers micro-diameter arrows, and test seat your arrows before the season rather than in the tree. A quiver that also has rubber or foam point seats is less likely to dull broadheads while the arrows sit in the hood.
Final Thoughts on the Best Quivers for Treestand Hunting in 2026
The best quivers for treestand hunting are rarely the ones with the most arrows. They are the ones that come off the bow with one hand, hang on a hook without a fight, and stay quiet while a buck works below you. Get those three right and almost anything else is a preference.
For the bow itself, the G5 Head-Loc Air Quiet Quiver wins on the combination of an included tree mount, a genuinely quiet hood, and secure micro-diameter grip. The LimbSaver Silent Quiver is the alternative if silence is your priority and you want five arrows and an eight ounce weight. Pair either with the Big Whitetail Dreams gear hanger, which is the most capable hang point here and the one we have leaned on hardest in the field.
Install everything before you climb, give the quiver its own hook at forearm height, and leave a single arrow on the bow. That routine does more for your sit than any spec on this list.